COMMAND Large Hooks: Surfaces and Installation Checks

Pack of white COMMAND adhesive hooks
On this page
  1. Match the hook to the item and surface
  2. Check the restrictions before applying
  3. Follow the full installation and removal sequence
  4. Confirm the pack and reuse method

Match the hook to the item and surface

The Command 17003ANZ large utility hook has a stated holding limit of up to 2.2 kg. Check the exact hook and replacement-strip instructions and keep within the rating. Count the full weight of the item and its contents; an empty bag and a loaded bag are different loads.

Check the restrictions before applying

Use only the surfaces and conditions permitted for the product. The Australian Command instructions exclude wallpaper and textured or rough surfaces, and advise against hanging valuable items, framed pictures or items over beds. An indoor utility hook should not be assumed suitable for a shower or outdoor exposure.

Follow the full installation and removal sequence

Use the instructions for this hook type, including surface preparation, pressing stages and the waiting period before loading. For removal, follow the specified slow stretch direction along the wall rather than pulling the adhesive out towards you. Inspect the surface condition first: a removable adhesive is not a guarantee against damage to every painted finish.

Confirm the pack and reuse method

Check the current pack description for the number of hooks and strips included. Reuse a hook only with the correct new replacement strip and the complete application process. Keep the official instructions with the product so the next installation follows the same limits.

Packaged white adhesive hook with a label identifying Command 17003ANZ.

Related products and guides

Further reading: Command manufacturer information; Command manufacturer information.

Related reading

Back to blog